Stealth Products RLSPKG100 Manual De Usuario página 7

- The swing away tube clamp (A) and the 1 3/8" male tube clamp (B) is used to
mount the hardware onto a 1 3/8" tubing.
- The spacer package is used when mounting onto a 1" or 1 1/8" tube.
3. Place the appropriate bushing (E) on the swing-away tube clamp (D) and use
the corresponding-sized male tube clamp (F) before mounting.
(A)
To install the track-style (RLSPKGTB3) hardware:
Align the two (2) track nuts into the groove on the side of the wheelchair. Slide the
assembly into the desired location, then use a 5/32" hex key to tighten the screws
firmly in place.
EN
(D)
(E) (F)
Installation
(B)
(C)
2