Kyutec KT1053 Guia De Inicio Rapido página 15

5. When I 'simulate' the snores in a silent background, why does the device not work?
A: Since the Kyutec Snore Stoppers special biosensor is designed according to the biophysical properties of snoring, so the
device will react, and you may try to 'simulate' in such ways: say a long 1, 2, 3 or produce 3 consecutive snores with the same
frequency and at least above 65 dB. Please try it again!
6. Why do I feel a special long time stimulation? Is something wrong with the device?
A: This is a special built-in design. As the microprocessor monitors your snoring frequency, if the device detects 15 times of
outputs, it emits a 25-seconds long stimulation is to train the heavy snoring person to change the sleeping position.
7. Are the two sides of the electrode pad different? Does it matter if there is no proper contact?
A: Yes, the two sides are different. One side of the electrode pad, which must be attached to the device, has stronger adhesion
(the side with printed words on the waxed protective film).
The device will work as long as the electrode pads are properly attached to the black conductive rubbers on the device. Do
not place the two electrode pads too close to each other, as this will affect conductivity. In the event the pads were stacked
together, gently move them apart and resume proper attachment.
26
EN
User FAQs Warranty
The manufacturer warrants this product against defects in material and workmanship under normal use for a period of TWO years
in EU countries, ONE year for all other international markets from the date of purchase. Contact support@kyutec.net for details.
The warranty covers breakdowns due to manufacturing or design faults; it does not apply in cases such as accidental damage,
however caused, wear and tear, negligence, adjustment, modification or unauthorised repairs.
If you have any question regarding a faulty unit or require further information please contact us at support@kyutec.net. If a defect
arises and a valid claim is received by Kyutec within the warranty period, then Kyutec will either:
repair the product, or exchange the product with one that is new or which has been manufactured from new or serviceable used
parts and is at least functionally equivalent to the original product.
This warranty is limited to the end-user and is not transferable to, or enforceable by, any subsequent owner.
27
EN