Modine ECO MIC 080 Manual Tecnico página 21

2. Applications
2.1 The unit must not be put into service until the machine to which it will be incorporated has been declared in conformity
with the Machinery Directive 2006/42/CE, see "Declaration of Incorporation" page 95. The unit is defined as "Partly
completed machinery".
2.2 The product must only be used for the stated purpose: use other than that prescribed is to be considered improper and
exempts Modine from all liability.
2.3 Use in unspecified operating conditions must be considered incorrect or improper.
2.4 Make sure that the fluids used are compatible with the materials used to build up the model.
2.5 The minimum protection level of the model is IP42. Refer to the annexe "ADDITIONAL INFORMATION SHEET" (when
present).
2.6 All the models are supplied with heat exchangers manufactured to internal standards in accordance with DIN8964 for
internal cleaning.
2.7 Please refer to any attachments to this manual.
2.8 Product description (see identification code, Chapter 15.2):
2.8.1 MIC Aeroevaporators (Unit Coolers) series MIC have the task of optimising the heat exchange between air and
another fluid H(C)FC-HFO in a refrigeration system. Inside a casing there is a heat exchanger consisting of 2
finned packs interconnected to a tube coil. The flow of relatively warm ambient air, created by the axial fans,
passes through the exchanger where the evaporation of the liquid flowing through the tubes takes place, resulting
in the absorption of the heat and the lowering of the outlet air temperature.
3. Identification
3.1 For any communication, request for assistance or spare parts, please provide the model name and serial number shown
on the data plate:
Figure 1
21
www.modine.com