Publicidad
Idiomas disponibles
Idiomas disponibles
8. Recommendations for a proper access to the model
Access
8.1
Disconnect drain connection R1 as to avoid hampering with fan shroud L1.
8.2
Loosen and remove fastening screws A of fan shroud L1 (note that some models have fastening screws on the hinge
side).
8.3
Bring fan shroud L1 to the position shown in "Figure 4".
8.4
To reach heaters R0 located under coil, remove the inner drip trays L3 by unfastening the self-threading screws B; the
heaters R0 are fastened with clips MF.
Remounting
8.5
Reposition the drip trays L3 by fastening screws B.
8.6
Reposition the fan shroud L1 and fasten with screws A.
8.7
Reconnect drain connection R1.
L1
=
Fan shroud
L2
=
Supports
L3
=
Inner drip tray
MF
=
Heater clip
R0
=
Heater
R1
=
Drain connection
SD
=
Junction boxes (fans and heaters)
Figure 4
25
www.modine.com
Publicidad
