Publicidad
Idiomas disponibles
Idiomas disponibles
5 Information about noise level and
vibrations
The values have been measured in conformity with EN 62841‑1.
EPK 18
Acoustic pressure level L
= 93.0 dB (A).
pA
Acoustic power level L
= 104.0 dB (A).
wA
In accuracy of measurements K = 3.0 dB (A).
ATTENTION! Noise is generated during work!
Use ear protection!
The weighted value of vibrations affecting hands and arms
a
= 5.6 m.s
.
‑2
h
In accuracy of measurements K = 1.5 m.s
The emission values specified (vibration, noise) were measured in
accordance with the test conditions stipulated in EN 62841 and are
intended for machine comparisons. They are also used for making
preliminary estimates regarding vibration and noise loads during
operation.
The emission values specified refer to the main applications for
which the power tool is used. If the electric power tool is used for
other applications, with other tools or is not maintained sufficient‑
ly prior to operation, however, the vibration and noise load may be
higher when the tool is used.
Take into account any machine idling times and downtimes to esti‑
mate these values more accurately for a specified time period. This
may significantly reduce the load during the machine operating
period.
6 Technical Specification
Model
Voltage (V)
Mains frequency (Hz)
Power input (W)
Idle speed (rpm)
Depth of cut (mm):
Cutting angle
Saw blade (mm):
Weight according to EPTA 09/2014 (kg)
Class of protection
‑2
.
90°
45°
Diameter
Clamping hole
Max. tooth width
Max. blade thickness
English
EPK 18
230
50–60
1 400
5 000
0–60
0–45
90°–45°
185
20
2.2
1.8
4.5
II /
19
Publicidad
