Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Instructions
Pairing the T-BT with the Heater
1. Double press the Pairing button on the SMART-R box of the heater. The green
pairing status LED will start to flash and the heater is ready for pairing.
2. Ensure the batteries are installed in the T-BT, but that the power button on the
unit is switched off. "OF" is shown on the display.
3. Long-press the SET button on the T-BT and the word "PAIR" will flash on the
display.
4. When pairing has completed successfully, the green pairing status LED on the
SMART-R box will become a steady green and the word "PAIR" on the T-BT will
disappear.
5. You should not experience any difficulty in pairing, but in case you do, please
ensure the T-BT and Heater are within range of each other and try the above
process again.
6. Press the Power button on the T-BT to start using it to control the heater.
Setting Time & Calibration
1. Press the SET button on the T-BT for 3
seconds to enter the settings mode.
Day 1 of the week will begin to flash
on the display.
2. Use the + or - keys on the T-BT to set
the day of the week. (e.g. if 1 is
Monday and today is Wednesday,
press + until 3 flashes in the display.)
3. Press SET again to advance to change the minutes and use the + or – keys to adjust.
4. Press SET again to advance to change the hour and use the + or – keys to adjust (it is
a 24 hour clock).
5. Press SET again to Calibrate the temperature of the T-BT to match another
thermostat. Calibration is not usually necessary and we explain its use later. If you
need to Calibrate, perform this step here.
6. Press SET again to change the temperature scale from Celsius to Fahrenheit.
7. The T-BT automatically saves your changes as you enter them.
T-BT Battery powered
wireless thermostat
Publicidad
