Publicidad
Idiomas disponibles
Idiomas disponibles
You can always check current consumption details by pressing the "-" and "+" button
together for 3 seconds. The display will show:
Factory Settings
To restore to factory settings, power off the thermostat, press and hold the "Holiday"
button for 5 seconds until the screen starts to flash.
Calibration
Calibration is a process to alter the temperature of the T-BT up or down in order to
align the unit with another thermostat.
The T-BT can be calibrated 5°C up or down from the default of 0 (no calibration). You
can calibrate in steps of 0.5°C.
Calibrating UP (i.e. +1 °C etc) means the T-BT will display a higher temperature than
the present one being shown. Use this when you think the T-BT is under-reading
compared with another thermostat.
Calibrating DOWN (i.e. - 1 °C etc) means the T-BT will display a lower temperature
than the present one being shown. Use this when you think the T-BT is over-reading
compared with another thermostat.
When adjusting the T-BT Time & Temperature settings using the SET button,
calibration is the final setting you can change. The default is 0. Use + or – keys to
adjust this figure up or down.
2 Year Warranty
Register your product at the Help & FAQs section of your local Herschel website.
Within two years from date of purchase Herschel will repair or replace the T-BT where
the fault is due to defects in materials or workmanship. This warranty is for standard
domestic use only and excludes commercial uses. In the event of a warranty claim
please visit the Customer Service area of the Herschel Website and follow the
Warranty Claim process. You will need proof of purchase.
Note your serial number here.
T-BT Battery powered
wireless thermostat
1.
Heating
today
2.
Energy
consumption
yesterday (in kW)
3.
Energy
consumption today
(in kW).
hours
Publicidad
