Hilti SI-AT-22 Manual De Instrucciones Original página 22

▶ Write down the serial number in the table below. You will be required to
state the product details when contacting Hilti Service or your local Hilti
organization to inquire about the product.
Product information
Adaptive torque module
Generation
Serial no.
2 Safety
2.1 Safety precautions
▶ Observe the safety precautions in the operating instructions for the
impact wrench.
3 Description
3.1 Product overview
Display
@
Indicator LEDs
;
Lock button
=
Left arrow button
%
Right arrow button
&
OK button
(
3.2 Intended use
The product described in an electronic module for controlled tightening
of fasteners so as to ensure the quality of the connection.
used only with Hilti impact wrenches that have the AT­22 suffix in the
model designation.
module and can be read out, for documentation purposes, using the
AT Documentation Software PC application.
It is not possible to set a particular torque manually on this module!
Use only the impact-wrench sockets described in the operating instructions
of the relevant product to tighten Hilti fasteners.
For this product, use only the Hilti Nuron lithium-ion batteries of the B 22
series recommended in the operating instructions of the impact wrench.
3.3 Possible misuse
Do not work with this product on electrically live lines.
This product is not suitable for Hilti fasteners in nuclear power plants! For
more information contact Hilti Service.
18 English
SI­AT­22
1
)
+
§
/
:
A record of the work carried out is saved in the
02
Scan button
Scanner
USB interface cover (shown
open in the illustration)
USB interface type C
Release button
2343812
*2343812*
It can be