Hilti SI-AT-22 Manual De Instrucciones Original página 30

▶ Remove the battery/batteries.
▶ Never transport batteries loose and unprotected.
batteries should be protected from excessive shock and vibration and
isolated from any conductive materials or other batteries that may come
in contact with the terminals and cause a short circuit. Comply with the
locally applicable regulations for transporting batteries.
▶ Do not send batteries through the mail.
instructions on how to ship undamaged batteries.
▶ Prior to each use and before and after prolonged transport, check the
product and the batteries for damage.
Storage of cordless power tools and batteries
WARNING
Accidental damage caused by defective or leaking batteries !
▶ Always store your products with the batteries removed!
▶ Store the product and the batteries in a cool and dry place. Comply with
the temperature limits stated in the technical data.
▶ Do not store batteries on the charger. Always remove the battery from
the charger when the charging operation has completed.
▶ Never leave batteries in direct sunlight, on sources of heat, or behind
glass.
▶ Store the product and batteries where they cannot be accessed by
children or unauthorized persons.
▶ Prior to each use and before and after prolonged storage, check the
product and the batteries for damage.
9 Troubleshooting
If the problem you are experiencing is not listed in this table or you are
unable to remedy the problem by yourself, please contact Hilti Service.
Please also pay attention to the troubleshooting information provided in
the operating instructions for the impact wrench used.
Malfunction
The message indi-
cating "Lock mod-
ule" is displayed.
26 English
Possible cause
Torque module
unlocked.
During transport,
Consult your shipper for
Action to be taken
▶ Press the lock button
to lock the torque
module and activate
the impact wrench.
2343812
*2343812*