Using The 1/4-Inch Quilting Foot - Brother XL-6452 Manual De Instrucciones

A
B
2
4
C
73
1
3
5
6
7
OPTIONAL ACCESSORIES

Using the 1/4-Inch Quilting Foot

Pattern
(Straight Stitch)
The 1/4-Inch Quilting Foot is used to sew fixed seam allowance 6.5
mm (1/4") when piecing together a quilt. (See fig.A)
1. Set the Pattern Selection Dial to Straight Stitch.
Set the Stitch Length between 2 and 2.5.
Set the Stitch Width 2.5 (center).
2. Change the foot to the 1/4-Inch Quilting Foot.
1 Seam allowance (1/4", 6.5mm)
3. Position the presser foot over the fabric and sew as shown in fig.
B and C.
• Achieve leaving an accurate seam allowance.
(See fig.B)
2 Beginning of stitching.
3 Align this mark with edge of fabric.
4 End of stitching
5 Align this mark with edge of fabric.
• Quickly stitch together a quilt. (See fig.C)
6 Top of fabric.
7 Seam (1/8", 3.2mm)
Stitch Length Stitch Width
2-2.5 2.5 (center)