Publicidad
Idiomas disponibles
Idiomas disponibles
14
www.aeg.com
For maximum duration
values, refer to "Technical
data".
5.11 Timer
•
Count Down Timer
You can use this function to set the
length of a single cooking session.
First set the heat setting for the cooking
zone, then set the function.
To activate the function or change the
time: touch
the indicators
display.
If the timer is not set, all
indicators disappear after 3
seconds.
Touch
or
minutes). After 3 seconds, the timer
starts to count down automatically. The
indicators
stays red.
When the timer finishes counting down, a
signal sounds and 00 flashes. To stop
the signal, touch
To deactivate the function: touch
The indicators
or
to set 00 on the display.
Alternatively, set the heat level to 0. As a
result, a signal sounds and the timer is
cancelled.
•
CountUp Timer
6. ADDITIONAL FUNCTIONS
6.1 Pause
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, all other
symbols on the control panels are
locked.
. The timer digits 00 and
and
light up on the
turns red, and
turns white.
to set the time (00 - 99
,
, and
disappear.
.
and
light up. Use
You can use this function to monitor how
long a cooking zone operates.
To activate the function: touch
twice. The indicator
timer starts automatically.
To deactivate the function: touch
When the indicators light up, touch
•
Minute Minder
You can use this function as a Minute
Minder when the hob is activated but the
cooking zones do not operate. To see
the Timer symbols, place a pot on a
cooking zone.
To activate the function: touch
the indicator
to set the time. The function starts
automatically after 4 seconds. The
indicators
stays red.
When you set the function, you can
remove the pot.
When the time comes to an end, a signal
sounds and 00 flashes. Touch
the signal.
To deactivate the function: touch
.
The indicators
or
to set 00 on the display.
The function has no effect
on the operation of the
cooking zones.
When the function is active,
and
used. The function does not
stop the timer functions:
and
To activate the function: touch
symbol turns red. The heat setting is
lowered to 1.
turns red, the
turns red. Touch
,
, and
disappear.
and
light up. Use
symbols can be
.
.
.
until
or
to stop
.
. The
Publicidad
