Publicidad
Idiomas disponibles
Idiomas disponibles
SOUND SYSTEM ASSEMBLY INSTRUCTIONS
4. From behind the assembly, to secure the sound
system (R) with two screws (HH).
Hardware Used
Screw
HH
5. Multiple sources can be wired to the sound system
using the inputs located at the back of the unit.
An optical cable is provided and we recommend using
this option to wire your television to the system for
best digital sound.
To supply power to the system:
1. Connect the small end of the Power Cable into the
DC Adaptor.
2. Connect the DC Adaptor into the DC 15V IN input
located on the back panel.
Assembly is now complete, with the help of another
person, move the assembly to the final desired location.
Once in final position you plug the sound system (R) into
the power outlet.
DISPLAY
A numerical display will illuminate on the front mesh to indicate the settings
(Volume Level, Bass Level, Treble Level, EQ and Source Selection).
When scrolling through source options, selections will be indicated as follows:
OP: OPTICAL : Optical Cable Input (Included)
L1: LINE IN : 3.5 mm Audio Cable Input (Not Included)
AU: R AUX IN L: RCA Cable Input Left and Right (Not Included)
BL: Device pairing
When scrolling through EQ options, selections will be indicated as follows:
1: EQ optimized for music
2: EQ optimized for movies
3: EQ optimized for dialogue
(CONT'D)
4
x 2
5
OPTICAL LINE IN
13
R
HH
R AUX IN L
DC 15V IN
Publicidad
