1. Unsnap and remove the climate/
hazard/clock panel. (Figure A)
2. Unsnap and remove the trim panel on
the drivers side of the dash and then
remove (2) Phillips screws. (Figure B)
2
DASH DISASSEMBLY
(Figure A)
(Figure B)
3. Unclip and remove the panel below the
left a/c vent, then remove (1) Phillips
screw. (Figure C)
4. Unsnap the knee panel from under the
steering wheel. (no need to completely
remove this panel). (Figure D)
Continued on the next page
(Figure C)
(Figure D)
|
1.800.221.0932
MetraOnline.com