Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Installation instructions for part 99-7336S
Hyundai Genesis Coupe 3.8 2010-2011
(For models equipped with auto climate control and without OE navigation)
KIT FEATURES
• ISO DIN radio provision with pocket
• Painted to match factory finish
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Radio housing • D) (6) Panel clips • E) (4) #8 x 3/8" Phillips screws
A
B
METRA - The World's best kits
®
99-7336S
C
®
metraonline.com
Dash Disassembly
Kit Preparation
Kit Assembly
– ISO DIN radio provision with pocket .......................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness:
• 70-7303
Antenna Adapter:
• 40-KI11
D
TOOLS REQUIRED
• Phillips screwdriver • Panel removal tool
E
CAUTION!
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
Table of Contents
...............................................2
.....................................................3
All accessories, switches, climate controls panels, and
© COPYRIGHT 2016 METRA ELECTRONICS CORPORATION
Publicidad
Manuales relacionados para Metra 99-7336S
Resumen de contenidos para Metra 99-7336S
- Página 1 ® Installation instructions for part 99-7336S Hyundai Genesis Coupe 3.8 2010-2011 Table of Contents (For models equipped with auto climate control and without OE navigation) Dash Disassembly ..........2 99-7336S Kit Preparation .............3 Kit Assembly KIT FEATURES • ISO DIN radio provision with pocket –...
-
Página 2: Dash Disassembly
® 99-7336S Dash Disassembly 1. Unclip and remove the shifter trim panel. (Figure A) 2. Unclip and remove the radio/climate control trim panel. (Figure B) 3. Unclip and remove the display trim panel to gain access to the top screws securing the radio. (Figure C) 4. -
Página 3: Kit Preparation
(Figure A) 4. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Test the radio for proper operation. 5. Secure the completed assembly to the sub-dash. 6. Reassemble the dash in reverse order of disassembly using the 99-7336 trim panel. -
Página 4: Important
® Installation instructions for part 99-7336S IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. -
Página 5: Características Del Kit
® Instrucciones de instalación para la pieza 99-7336S Hyundai Genesis Coupe 3.8 2010-2011 Indice (Para los modelos equipados con control de clima automático y sin navegación OE) Desmontaje Dash ..........2 99-7336S Preparación del kit ..........3 Ensamble del kit CARACTERÍSTICAS DEL KIT •... - Página 6 ® 99-7336S Desmontaje Dash 1. Desenganche y quite el shifter panel de ajuste. (Figura A) 2. Desenganche y quite del panel de control del radio/clima panel de ajuste. (Figura B) 3. Desenganche y quite el panel de ajuste de visualización para tener acceso a los tornillos superiores que fijan la radio.
-
Página 7: Preparación Del Kit
(4) tornillos Phillips #8 x 3/8”. (Figura A) 4. Localice el arnés de cableado (Figura A) de fábrica en el tablero. Metra recomienda que use adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. Pruebe el radio para verificar que funcione correctamente. -
Página 8: Importante
® Instrucciones de instalación para la pieza 99-7336S IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente...