Publicidad
Idiomas disponibles
Idiomas disponibles
EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIE
This manual has important information for installation, operation and maintenance of your Air Compressor. It is very important to read
EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIE
Our compressors are the result of advanced technology
EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.
for manufacturing of compressed air generation
equipment for domestic, commercial and industrial
applications.
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIE
We include these instructions with the purpose of insuring
proper installation and operation of your equipment.
Please read them carefully before using your equipment
for the first time.
EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.
Given adequate service to your Air Compressor you
will ensure optimum performance in operation of your
equipment for many years.
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIE
CAUTION: THE ENGINE AND THE PUMP HEAD
ARE SHIPPED FROM THE FACTORY WITHOUT OIL
EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.
C A U T I O N : P N E U M AT I C T I R E I S S H I P P E D
DEFLATED. INFLATE THE TIRE TO 30 PSI MAXIMUM
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIE
If your compressor is going to be used in a permanent
EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.
1
place, firmly secure it to the floor, if not, ensure the
compressor will not move when used. Attach to the
legs of your compressor the anti-vibration mounts that
are provided with your compressor, as shown in the
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIE
EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIE
EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIE
2
Before starting your compressor make sure the hoses
and pipes are not damaged.
3
Install the compressor in a clean, well ventilated and
EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.
free of flammable vapors place. If the compressor is
installed around an object or wall obstructing the free
flow of air through the filters, move it so as to separate
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIE
it from the wall or object at least 15" (38 cm.). Your
compressor should be as close as possible to the work
place, thus avoiding the use of a very long hose and
prevent pressure drop in the line. Do not install your
EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.
compressor in places with high ambient temperatures,
such as near of a heater.
Keep the air filter free of obstructions, otherwise, the
4
PROPIEDAD EVANS.COM.MX PROPIEDAD EVANS.COM.MX PROPIE
flow of air delivered by the compressor will be reduced.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
To help us serve you better, please do not hesitate to contact us if you have any problems or suggestions.
this manual carefully before you start using your Air Compressor and keep it in a safe place for further reference.
Thank you for your preference, we hope to have the pleasure of serving you again in the future.
IMPORTANT SAFETY INFORMATION ON HOW TO PREVENT
DAMAGE TO EQUIPMENT AND ENSURE PERSONAL SAFETY
INTRODUCTION
INSTALLATION
IMPORTANT
INDICATIONS
ALWAYS KEEP CHILDREN AWAY FROM THE AIR
5
COMPRESSOR. The Air Compressor may stop and
start automatically when air tools are continuously used.
Never use your Air Compressor in the rain or in wet
6
conditionsas this could cause serious damage to the
gas engine and cause personal injury.
Your compressor is designed to ventilate itself. Never
7
cover the engine or the pump head, this will prevent air
circulation during Air Compressor operation.
8
Always keep your Air Compressor clean to ensure
optimal preformance.
Do not weld anything to the the air tank (s). This could
9
affect the mechanical strength of the tank(s) walls and
provoke an extremely dangerous condition. This action
will invalid the warranty.
10
If you apply spray paint or other liquids, do it in an open
and well ventilated place far away from flames or electric
equipment.
Before connecting pneumatic equipment make sure
11
this consumes less o equal air flow that the compressor
generates at the necessary pressure.
Check the security valve, pulling off the wire ring with
12
the hand. This action prevents the valve from sticking.
Check the belt tension, is between 60 lb and 80 lb, verify
13
in the middle point of the belt between the pulley and
compressor's flywheel.
Ensure the oil level in the head pump will be always close
14
to the red line of the sight glass, as shown in the image
below. Refill with SAE-10W30 or ANDEROL synthetic
oil. Do not use automobile oil.
Maximum oil level
(NOT recommended)
Mínimum oil level
(NOT recommended)
CAUTION: The air that this Air Compres-
sor produces is not safe for breathing.
High temperatures are generated by the engine and the
pump head during operation. To prevent injuries never touch
the compressor. Always ensure the engine and pump head
are cold before touching.
Recommend-
ed oil level
OPERATING
9
Publicidad
