MZ electronic EV-040 Instrucciones De Uso página 19

Connections
Sensor hole
Recharging the transmitter
Open the cap on the rear of the transmitter, insert the plug of the battery charger making sure
•
that the reference mark is facing upward. Plug the battery charger into a cigarette lighter to start
charging.
When the charger is switched on the blue LED will light up.
•
EV-040
6-POLE CONNECTOR
PIN
1 + battery
2 - battery
3 DOWN command
4 UP command
5 Magnetic sensor
6
sensore magnetico
magnetic sensor
4
min.44 mm(1"3/4)
SIGNAL
19
English
Rev. 10 – 2014