Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Note: Regardless of configuration, the user must determine the
fitness of hardware and procedures before mounting. The PDU
and included hardware are designed for common rack and rack
enclosure types and may not be appropriate for all applications.
1A
Zero U Rack Configuration (Mounting Brackets). Prior to
installation, determine the rack location in which the PDU is
to be installed. Attach the mounting brackets to the back of
the PDU as shown, using the included screws. To assist with
proper positioning, the brackets have four screw holes each;
make sure that the same two holes are used to attach each
bracket to the PDU. After attaching the brackets, position
the PDU in the rack and mount it by installing four user-
supplied fasteners through the brackets into the rack.
1B
Zero U Rack Configuration (Mounting Buttons). Attach
the included mounting buttons to the PDU. Position the PDU
as desired in the rack enclosure, align the buttons with the
rack mounting slots, and slide the PDU into position.
1C
Under-Counter Configuration. The PDU may be installed
under a counter using the included mounting brackets.
Attach the mounting brackets to the back of the PDU as
shown in STEP 1A. Secure the PDU to the underside of the
counter by installing two user-supplied screws through each
bracket into the counter.
Note: Your model may differ.
Features
2
1
NEMA 5-15/20R Outlet (PDUMV30, PDUV30-36)
1
C13 Outlet (PDUMV20HV, PDUV20HVL6-72, PDUMV20HVL6, PDUMV20HV-36,
2
PDUMV30HV, PDUV30HV)
3
C19 Outlet (PDUMV20HV, PDUV20HVL6-72, PDUMV20HVL6, PDUMV20HV-36,
PDUMV30HV, PDUV30HV)
4
L5-30P, L6-20P or L6-30P Locking Plug
Circuit Breaker: If the current drawn by the equipment connected to the PDU exceeds
5
the Maximum Load Rating, the circuit breaker will trip to prevent possible damage. When the
circuit breaker trips, its plunger will pop up. Disconnect excess equipment and allow the
breaker to cool at least one minute before depressing the plunger to reset the breaker.
6
Ammeter: The total electrical current used by the PDU will be displayed on the digital meter
in amperes (select models only).
20-03-390-932685.indb 3
20-03-390-932685.indb 3
3
4
3
1A
1B
1C
5
6
5/19/2020 12:19:22 PM
5/19/2020 12:19:22 PM
Publicidad
