Descargar Imprimir esta página

Samsung harman/kardon HW-Q80R Manual página 11

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Manually connecting the Subwoofer if automatic connection fails
Before performing the manual connection procedure below:
• Check whether the power cables for the Soundbar and subwoofer are connected properly.
• Make sure that the Soundbar is turned on.
1. Press and hold ID SET on the rear of the subwoofer for at least 5 seconds.
• The red indicator on the rear of the subwoofer turns off and the blue indicator blinks.
2. Press and hold the Up button on the remote control for at least 5 seconds.
• The ID SET message appears on the display of the Soundbar for a moment, and then it
disappears.
• The Soundbar will automatically power on when ID SET is complete.
5 Sec
3. Check if the LINK LED is solid blue (connection complete).
Rear of Subwoofer
"Samsung Harman Kardon" logo is on the top
Blue is On
ENG - 7
5 Sec
The LINK LED indicator stops blinking and
glows a solid blue when a connection is
established between the Soundbar and the
Wireless Subwoofer.
ID SET

Publicidad

loading