Publicidad
Idiomas disponibles
Idiomas disponibles
7.2.
Faults Display
Problem
"Pr1" flashes on the display and
the buzzer emits an intermittent
noise
(cold room probe error)
"Pr2" flashes on the display and
the buzzer emits an intermittent
noise
(evaporator probe error)
"Pr3" flashes on the display and
the buzzer emits an intermittent
noise
(condenser probe error)
The letters "rtc" (clock error) will
flash on the screen
8.
INSTALLATION
8.1.
Packaging And Unpacking
Move and install the appliance respecting the
information provided by the manufacturer, shown
directly on the packaging, on the appliance and in
this manual.
The lifting and transportation system of the
packaged product envisages the use of a fork-lift
truck or a pallet stacker, using which particular
attention must be paid to balancing the weight in
order to prevent the risk of overturning (avoid
excessive tilting!).
!
ATTENTION: When inserting the lifting
device, pay attention to the gas supply pipe and
the position of the feet.
!
ATTENTION: given the presence of weights
concentrated in the high part of the appliance, do
not drag the appliance during movements (tipping
hazard and damage to feet).
The packaging is made of cardboard and the
pallet of wood. A series of symbols is printed on
the cardboard packaging which highlights, in
accordance with international standards, the
provisions which the appliances must be subject
to during loading, unloading, transportation and
storage.
Causes
The wrong type of probe is
installed.
The probe is faulty.
The probe – circuit board
connection is incorrect.
The temperature detected
by the probe is out of the
limits accepted by the cold
room probe in use
The current time setting has
been deleted.
On delivery, check that the packaging is intact and
has
transportation.
Any damage must be notified to the transportation
company immediately.
The appliance must be unpacked as soon as
possible to check that it is intact and undamaged.
Do not cut the cardboard with sharp tools in order
to
underneath.
Pull the cardboard packaging upwards.
After having unpacked the appliance, check that
the features correspond to those requested in the
order;
For
immediately.
!
polystyrene foam, staples ...) must not be left
within reach of children.
15
ENGLISH
Solutions
Contact the after-sales centre.
Check that the cold room probe
is the NTC type.
Check the integrity of the cold
room probe.
Check correctness of the
instrument - probe connection.
Check that the temperature in
proximity of the cold room probe
is not out of the accepted limits
Set the day and time.
TOP
FRAGILE
HANDLE
WITH CARE
not
suffered
any
prevent
damage
to
any
anomalies,
connect
Packaging
elements
DO NOT EXPOSE
TO HUMIDITY
damage
during
the
steel
panels
the
dealer
(nylon
bags,
GB
Publicidad
