Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Before first use
● carefully clean the ceramic plate treating it as a glass surface,
● when used for the first time the plate can give off a bit of a smell so switch on the ventilation
system or open the window,
● operate the plate observing the safety instructions.
Note. When you connect your appliance to power for the first time the cooking zone
display may show the letter „H". This is not a defect, and the letter „H" will disappear
after about 60 minutes.
The ceramic plate is equipped with sensors operated by touching the marked areas with a
finger.
Every touch of a sensor is confirmed with a sound.
When switching the plate on and off and setting the heating power always touch
only one sensor. If you touch several sensors at the same time (with the exception of
switching off the hotplate or the clock), the system will ignore the entered settings and,
should you keep touching the sensors for a long time, will emit a fault signal.
40
Publicidad
