Publicidad
Idiomas disponibles
Idiomas disponibles
Press the heating zone selection control of the double
loop heating zone e.g. power level is 6
When the power level indicator flash, then press " "
After 5 seconds, the indicator stop flash, the double loop
function is activate, and power level shows "6" and "="
alternately.
Press the heating zone selection control of the double loop heating zone, the power level indicator flash,
then press "
", the double loop function will be cancelled, and power level return to "6" .
Note:
1、 The double loop is available only in the 1# and 3# cooking zone.
2、 You can select the function from level 1 to level 9.
3.3.4 Locking the Controls
•
You can lock the controls to prevent unintended use (for example children accidentally turning the
cooking zones on).
•
When the controls are locked, all the controls except the ON/OFF control are disabled.
Touch the lock
When the hob is in the lock mode, all the controls are disable except the ON/OFF
the ceramic hob off with the ON/OFF
next operation.
3.3.5 Timer control
You can use the timer in two different ways:
a
You can use it as a minute minder. In this case, the timer will not turn any cooking zone off when the
set time is up.
b) You can set it to turn one or more cooking zones off after the set time is up.
•
The timer of maximum is 99 minutes
a) Using the Timer as a Minute Minder
If you are not selecting any cooking zone
Activate the Double zone
Deactivate the Double zone
To lock the controls
control
To unlock the controls
Make sure the ceramic hob is turned on
Touch and hold the lock control
The timer indicator will show " Lo"
for a while.
control in an emergency, but you shall unlock the hob first in the
9
,
you can always turn
Publicidad
