Publicidad
Idiomas disponibles
Idiomas disponibles
Replace the batteries if:
• The weak battery symbol appears on the display.
• Nothing appears on the display when the power is
switched on.
As the supplied batteries are for test only, they may be
discharged earlier than batteries you buy in stores. Replace
all batteries at one time (as simultaneous set). Use only
1.5V "AAA" alkaline batteries. Remove batteries when unit is
not in use for extended periods of time. Date and time will
need to be reset if batteries are removed or replaced. Clean
contacts on battery and in battery compartment with a soft
dry cloth each time you install batteries.
Note:
Batteries are hazardous waste. Do not dispose of them
together with the household garbage.
13
DATE & TIME SET PROCEDURE
1
. To adjust the date/time, press the SET button
The display will show a blinking number showing the
MONTH.
2. Change the MONTH by pressing the
press will increase the number by one in cycling
manner. Press the SET button
the entry, and the screen will show a blinking number
representing the DAY of the month.
3. Change the DAY, HOUR, and MINUTE as described
in Step 2 above, using the
numbers and the
SET button
repeat process to set DAY, HOUR
and MINUTE
button. Each
again to confirm
button
to change the
to confirm the entries.
Press the
button
blinking MONTH
increasing MONTH
confirm the entry
14
.
Publicidad
