Domo DO1069S Manual De Instrucciones página 23

· Any injury or damage caused by failure to comply with these rules are at your own risk. Neither the
manufacturer, importer, or the supplier may be held liable.
PARTS
1. Filling opening
2. Water tank
3. Temperature indication light
4. Temperature dial
5. Soleplate
6. Thermal insulation pads
7. Cable storage
BEFORE THE FIRST USE
· Remove any stickers or protective foil from the soleplate.
· Heat up the iron until the maximum temperature and iron on a damp cloth during a couple of minutes
to remove any possible residues from the soleplate.
CAUTION:
· Appliances are tested following production. It is thus perfectly normal if droplets of condensation have
formed in the water tank.
· During the first use it is normal that a specific odeur escapes from the appliance. This odeur will
disappear after a while.
· Some particles may come out of the soleplate during the first use. This is normal. The particles are
harmless and will disappear after a while.
· When turning on the appliance, the steam generator may produce a pumping sound. This is normal.
This sound indicates that water is pumped into the steam generator.
· While the soleplate is heating up, some steam will be released automatically. This is also normal and
will last for about 3 seconds.
USE
This steam generator offers 2 options: dry ironing or steam ironing. Follow the instructions below. Also
carefully read the ironing tips at the end of this section before using the appliance.
DRY IRONING
1. Place the iron on the thermal insulation pads of the steam generator.
2. Put the plug into the outlet. Select the desired temperature with the
temperature dial, according to the kind of fabric that needs to be
ironed. The iron will start to heat up. The temperature indicator light
will light up.
www.domo-elektro.be
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
2
3
4
5
1
7
6
23
DO1069S