Velleman CAMIP10N Manual Del Usuario página 19

11.12 Mail Service Settings
Define mail service settings
Note
The settings on this page will only take effect if the option Send Mail
on Alarm is selected in the Alarm Service Settings (see below).
1. Fill in a senders e-mail address in the Sender field.
This is the mailbox from which the mails will be sent.
2. Fill in up to 4 receivers mail addresses.
When an alarm condition occurs, mail is sent out to these
addresses.
3. Fill out all SMTP data related to the sender‟s mailbox.
4. If authentication for the mailbox is required, select the checkbox
and enter user name and password in the appropriate fields.
5. If the Report Internet IP by Mail box is selected, a mail is sent
whenever a camera comes online (for example after reboot) or a
change in IP address occurs.
Make sure the port is correctly mapped to the router.
V. 02 – 22/02/2013
CAMIP10N
19 ©Velleman nv