APEXFORGE M6 Pro Manual Del Usuario página 11

Functions Description
On / Off Switch
This product has an easy access power
switch (G) located at the bottom of the tool.
To turn the tool ON, push the ON/OFF (I / O)
switch (G) to the ON (I) position.
To turn the tool OFF, push the ON/OFF (I / O)
switch (G) to OFF (O) position.
Replacing Collets
Using collets is the most precise way to hold an accessory in a high speed
rotating. Even at high speeds and maximum pressure, collets stay tight.
▪
Unplug the rotary tool.
▪ Press and hold the shaft lock button(A), and rotate the shaft with
the provided collet wrench (E) until the shaft lock (A) engages
the shaft, preventing further rotation.
▪
With the shaft lock (A) engaged, use the collet wrench (E) to loosen the
collet nut (D), if necessary.
▪
Remove the collet nut (D) and old collet (C) using collet wrench (E),
if necessary.
▪
Insert the unslotted end of the new collet (C) in the hole in the end of the
tool shaft.
▪
Tighten the collet nut with the collet wrench (E)
A
E
Installing Accessories
WARNING
Do not press the shaft lock button (A) while rotary tool is running.
▪
Unplug the rotary tool.
▪
Press and hold the shaft lock button(A), and rotate the shaft by hand until
the shaft lock engages the shaft, preventing further
rotation.
▪
With the shaft lock button engaged, use the collet wrench (E) to loosen
the collet nut (D), if necessary.
D
- 08 -
G
D
A
C