Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
READY: The shredder is currently on STANDBY and ready to operate when paper is inserted. With the
feed slot now exposed, you can shred sheets of paper or 1 credit card per pass (FIGURE 5).
DISABLED: The safety feature has been activated. All power to the SHREDDER IS
CURRENTLY SHUT OFF AND WILL NOT OPERATE until the cover is returned to the "READY"
setting. The cover has been completely tilted beyond the safe position (FIGURE 5).
When shredding is completed, you can press the designated "PUSH CLOSE" area on the cover to tilt
shut the paper feed slot (FIGURE 4). It is recommended to have the paper feed slot closed when shredder
is not in use to prevent any objects from accidentally getting into the feed slot.
*Be sure to not tilt open the cover completely beyond the preset position, otherwise
the ShredSafe™ power cut off feature will be activated and the shredder will be
inoperable.
Shredding of any of the following materials is considered misuse and will completely
void the product warranty:
Never shred large paper clips, envelopes (any window, insulated, or with glued flaps),
adhesive materials (labels, decals/stickers, glued paper), newsprint, transparencies,
laminated documents, continuous forms, cardboard, or hard and plastic materials
(except Credit Cards).
This shredder will shred staples and small paperclips. It is recommended that you remove paper clips
whenever possible to extend the lifespan of your shredder.
Only shred credit cards by feeding them vertically into the middle of the entry, releasing when
shredding begins. Never feed more than one credit card at a time. DO NOT ACTIVATE REVERSE
FUNCTION WHILE SHREDDING CREDIT CARDS.
6
CONTINUED NEXT PAGE
OPERATION
Overfeeding the shredder: Shredding beyond the specified sheet capacity can result in extensive
damage to the shredder. Overfeeding will strain the machine and quickly wear and break the cutting
blades and internal components.
FIGURE 5
Overheating with extended use: In the event that the shredder has shred continuously beyond
the maximum running time and overheating, the unit will automatically shut off. If this happens, switch
the shredder Off for 30 minutes or longer before resuming normal operation.
MAINTENANCE
Warning: Failure to properly maintain your shredder will void the warranty. Crosscut
shredders require regular oil lubrication for optimal performance and extended lifespan. We recommend
you oil your shredder once a month. Your basic vegetable or cooking oil (nothing flammable or petroleum
based) can be drizzled onto a few sheets of paper and fed into the shredder.
ONLY USE NON-AEROLSOL VEGETABLE BASED OILS TO OIL YOUR CUTTERS. DO NOT
SPRAY OR KEEP ANY AEROSOL PRODUCTS IN OR AROUND THE SHREDDER. DO NOT USE
CANNED AIR.
Be sure to periodically empty the wastebasket to avoid overloading and damaging the cutting mechanism.
• ALWAYS UNPLUG THE SHREDDER BEFORE CLEANING!
• Only clean the shredder by carefully wiping the unit with a dry soft cloth or towel.
• Do not clean or immerse shredder in water. Having the unit wet may result in damage or malfunction
to the electrical components. If the shredder happens to get wet, be sure to completely dry the unit
immediately with a cloth or towel.
• Never use anything flammable to clean the shredder. This may result in serious injury or damage to
the product.
7
Publicidad
