Domo DO1000S Manual De Instrucciones página 30

PARTS
1. Filling opening
2. Water tank
3. Steam release button
4. Temperature dial
5. Soleplate
6. Thermal insulation pads
7. Control Panel
8. Cord storage
CONTROL PANEL
9. Steam indicator light
10. Steam selection button
11. On-off button
12. Descale button with indicator light
BEFORE THE FIRST USE
1. Remove any stickers or protective foil from the soleplate.
2. Heat up the iron until the maximum temperature and iron on a damp cloth during a
couple of minutes to remove any possible residues from the soleplate. Iron according to
the instructions in the section «Steam ironing».
Caution:
· During the first use it is normal that a specific odeur escapes from the appliance. This odeur
will disappear after a while.
· Some particles may come out of the soleplate during the first use. This is normal. The
particles are harmless and will disappear after a while.
· When turning on the appliance, the steam generator may produce a pumping sound. This
is normal. This sound indicates that water is pumped into the steam generator.
· While the soleplate is heating up, some steam will be released automatically. This is also
normal and will last for about 3 seconds.
30
DO1000S
1
2
11
3
4
5
6
7
8
9
10
12