Yamaha YVC-331 Manual Del Usuario página 14

Connecting to Communication Equipment
This chapter describes how to connect to each communication device.
After the connection is established, check that sound is output correctly.
Connecting to a PC/Mac using the USB cable
■ Check the following before the connection procedure
Make sure that you have the supplied USB cable available.
In addition, the PC/Mac connected to the product must meet the following system requirements:
• OS: Windows (*1), macOS (*1)
• USB: USB 2.0 or later
(*1) For the supported versions, refer to the following website:
https://uc.yamaha.com/
Notes
• You cannot connect more than one microphone or speaker including this product to one PC/Mac and use them at the
same time.
• Use the supplied USB cable only. Using a different USB cable may cause the product to malfunction.
• The product must be connected directly to a PC/Mac. Connecting the product via a USB hub may cause the product to
malfunction.
• In rare cases, an audio playback may be interrupted due to PC/Mac usage, such as the workload or limited free space
in memory.
■ Connecting the devices
Connect between the product and a PC/Mac through the supplied USB cable.
Tips
• The product receives power from the PC/Mac through the USB cable (USB bus powered).
• You do not need to install a separate USB driver because the PC/Mac recognizes the product as a standard
USB audio device.
To the USB terminal
YVC-331 User's Manual
13