Publicidad
3
For Model T4740 Only
Install lift rod (1). Screw the lift rod until it drops down and
A.
rotates freely.
Remove and discard the test cap and gasket (1). NOTE: This is an
B.
extra gasket, one is supplied with the hose.
1
Slide hose (1) through conical nut (2). Attach hose (1) to braided
C.
metal hose (3) using gasket (4) and tighten. DO NOT install hand
piece yet.
Install base (1) to nest (2) and tighten. OPTION: Use silicone
D.
under the base if deck is uneven.
6
1
4
3
1
2
47799
Rev. A
Publicidad
