Alarm Function; Time/Date - Fronius Primo 3.8-1 208-240 Manual De Instrucciones

Relay Mode
communications area:
-
-
-
Setting range
Factory setting
Relay test
Switch on point (only if "Energy manager" function is activated )
switched on
Factory setting
Setting range
Switch off point (only if the "Energy manager" function is activated)
switched off
Factory setting
Setting range

Time/Date

Setting the time, date and automatic adjustment for daylight saving time
Setting range
Set time
Setting the time (hh:mm:ss or hh:mm am/pm, depending on the setting under Time dis-
play format)
Set date
Setting the date (dd.mm.yyyy or mm/dd/yyyy, depending on the setting under Date dis-
play format)
Time display format
For specifying the format in which the time is displayed
Setting range
Factory setting
30
For selection of the various functions of the potential-free switching contact in the data

Alarm function

Active output
Energy manager
Alarm function:
Permanent / Switches the potential-free switching contacts for continual and tem-
ALL: porary service codes (e.g., brief interruption of grid power feed opera-
tion, a service code occurs a set number of times per day – can be set
in the "BASIC" menu)
Active output:
ON: The potential-free switching contact NO is switched on at all times
while the inverter is operating (as long as the display lights up or ap-
pears)
OFF: The potential-free switching contact NO is switched off
Energy manager:
E-manager: You can find additional information on the "Energy manager" function
in the "Energy Manager" section below
Functional test to check if the potential-free switching contact works
for setting the effective power limit from which the potential-free switching contact will be
for setting the effective power limit from which the potential-free switching contact will be
ALL / Permanent / OFF / ON / E-manager
ALL
1000 W
Switch off point – max. power rating of the inverter / W / kW
500
0 – switch on point / W / kW
Set time / Set date / Time display format / Date display format /
Daylight saving time
12 hrs / 24 hrs
depends on the country setup