4
Secure the walls...cont!
Break off a plastic fastener and spacer from ring. Place spacer onto the fastener and
insert it into the hole located on the raised brick as shown.
5
Break off a plastic fastener (x3) (spacer is NOT NEEDED). Insert the fastener (x3) in locations shown.
6
Plastic
Fastener
+
Spacer
x1
Plastic Screw Tool
For ease of
assembly:
use plastic
screw tool
to press pin
into place.
Plastic
Fastener
x3
Plastic Screw Tool
For ease of
assembly:
use plastic
screw tool
to press pin
into place.