Brita ON TAP Instrucciones De Uso página 3

I. Thank you for choosing BRITA quality
for cleaner, fresher tasting water.
The ON TAP system
1
Attachment nut
2
Rubber gasket
3
Pre-filter screen
4
Filter cartridge cap
5
Filter cartridge
6
Water selection lever
7
Filter exchange indicator
8
Unfiltered water outlet
9
Filtered water outlet
10
Battery slot
11
Reset button
12
Optional adapters - Type A,B,C
The innovative BRITA ON TAP filtration technology
4-step filtration
Taste and odour impairing
substances (e.g. chlorine)
Heavy metals
(e.g. lead)
Pesticides
Medical residues
Herbicides
Sediments and Particles
Bacteria
Limescale
5-step filtration
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
> 60 μm > 0,5 μm
✕
99,99 %
✕ ✕
Over 50 years of experience is a guarantee of quality
For over 50 years, BRITA has stood for constant innovation and the highest
quality of water filter solutions. To reach high quality requirements at BRITA
there are stringent internal and external quality controls.
Lifetime of the ON TAP water filter
ON TAP water filter lifespan depends on local water quality. The ON TAP water
filter filters up to 600 litres. To ensure optimum performance you should change
your ON TAP water filter every 600 L / four months. To remind you of the next
water filter change, your BRITA ON TAP is equipped with a filter exchange
indicator.
II. Quality from the very start.
To ensure that you get the best results from your BRITA ON TAP, please follow
the instructions carefully.
Preparation
This device can only attach to taps with a diameter between 15 mm and 25 mm.
Before attaching the device to the tap, the matching adapter should be selected
first. The adapters allow this device to be attached to most taps, except for:
15 mm
15 mm
Round outlet Outlet length < 15 mm
Pull-Out outlet Sensor control
Oval outlet
Spray outlet Square outlet
3