Publicidad
Idiomas disponibles
Idiomas disponibles
Mounting on and removing from the
digital camera
• Check that the digital camera is turned off. (Mounting the unit onto, or
disengaging it from, the camera while the power is on may cause trouble
and is not recommended.)
1 1 Remove the cover for the
battery grip connector on
the digital camera.
• The cover for the battery grip
connector can be stored in the cover
storage in the battery grip.
2 Remove the terminal cap on
the electrical contacts of the
battery grip.
• Return the cover for the battery grip
connector and the terminal cap to their
original position after use to protect the terminals.
• Be careful not to lose the terminal cap.
2 Insert by aligning the
attachment screw, electrical
contacts, and camera
attachment pins.
3 Turn the attachment screw in
direction of the arrow to
attach securely.
• Confirm that the attachment screw is
not loose while using.
Note
• Keep the terminal cap out of reach of children to prevent swallowing.
∫ Remove the battery grip from the digital camera
• Confirm that the digital camera is not powered, and turn the attachment
screw in the opposite direction of the attachment.
(ENG) DVQX1339
7
Publicidad
