Dogtra ARC 800 FREE Manual De Instrucciones página 26

the LCD screen might take a moment to respond causing the
intensity level to freeze at that current level. In this situation,
if you turn the rheostat intensity dial, the level on the screen may
not change but the actual intensity from the receiver/ collar will
change in agreement with the dial. In this situation, it is ideal to
either wait until your transmitter is back to working order before
emitting a correction, or while holding the constant button down
slowly turn the Rheostat Intensity Dial while watching your dog's
reaction. Do not turn the Rheostat Intensity Dial at a rapid increase
because the receiver/collar will emit a static correction based on the
level of the Rheostat Intensity Dial, which might not be correctly
10. How to Attach the Belt Clip on the ARC 800 Free
To attach the included belt clip to the transmitter, follow the
instructions below.
1. Align the belt clip to the grooves on the back of the
transmitter.
Philips head screws.
Caution!
tighten.
50
11. How to Use the Test Light
1. Turn on the receiver/collar and place the test light over
the contact points as shown in the diagram.
2. The test light will illuminate momentarily when the Nick
stimulation button is pressed on the transmitter. The light
will stay lit as long as the Constant button is pressed on
the transmitter, up to 12 seconds.
3. When the stimulation is increased, the test light will emit
a brighter light.
51