Publicidad
Idiomas disponibles
Idiomas disponibles
Safety Information
Technical Data
Battery Data
Article Nr. Name
4211550012 Battery 18V Li-ion 18V,
4211550022 Battery 18V Li-ion 18V,
4211550032 Battery 30V Li-ion 28V,
4211550042 Battery 36V Li-ion 36V,
Ambient Temperature
For best battery performance and life time, keep battery
within temperature intervals.
Operating temperature, charge
Operating temperature, discharge
Transportation temperature
Storage temperature
Do not place battery in direct sunlight.
Battery Charger Data
Battery charger
Battery charger operating
temperature
Other chargers not allowed. Charging the battery on a
not approved charger is considered as altering the system
and will make the tool certification invalid.
Declarations
EU DECLARATION OF CONFORMITY
We, Atlas Copco Industrial Technique AB, SE-105 23
STOCKHOLM SWEDEN, declare under our sole responsi-
bility that the product (with name, type and serial number, see
front page) is in conformity with the following Directive(s):
2014/30/EU
Harmonized standards applied:
EN 55014-1:2017 EN 55014-2:2015 EN 61000-6-2:2005 EN
62133-2:2017
4
Technical
Compatible
Type
Data
Tools
BCV, BCP
2.5Ah,
STB3, SB3
45Wh
EBB26,
EBP26
BCV, BCP
5Ah,
STB3, SB3
90Wh
EBB26,
EBP26
STB6, SB6
5Ah,
140Wh
BCV
2.5Ah,
90Wh
+5 to +40 °C
(+41 to +104 °F)
0 to +40 °C
(+32 to +104 °F)
−20 to +40 °C
(−4 to +104 °F)
+10 to +25 °C
(+50 to +77 °F)
Multicharger, 4211 5424 85
+5 to +40 °C
(+41 to +104 °F)
© Atlas Copco Industrial Technique AB - 9834 6281 00
Authorities can request relevant technical information from:
Aleksandra Duric, Product Compliance Manager, Atlas
Copco Industrial Technique AB, SE-105 23 Stockholm Swe-
den
Stockholm, 21 November 2022
Carl von Schantz, Managing Director
Signature of issuer
Battery Directive
Information concerning Waste of Batteries:
This product and its information meet the re-
quirements of the Battery Directive (2006/66/
EC), and must be handled in compliance with
the directive.
Batteries are marked with a crossed-out wheeled
bin symbol without a single black bar under-
neath. The battery must be recycled either ac-
cording to local regulations or sent to your "Cus-
tomer Center" for handling.
Conformity to North American Standards
5025273
5015332
UK DECLARATION OF CONFORMITY
We, Atlas Copco Industrial Technique AB,
SE-105 23 STOCKHOLM SWEDEN, declare
under our sole responsibility that the product
(with name, type and serial number, see front
page) is in conformity with the following UK
Regulation(s):
S.I. 2016/1091
Designated Standards applied:
EN 55014-1:2017 EN 55014-2:2015 EN
61000-6-2:2005 EN 62133-2:2017
Authorities can request relevant technical information from:
Aleksandra Duric, Product Compliance Manager, Atlas
Copco Industrial Technique AB, SE-105 23 Stockholm Swe-
den
Stockholm, 21 November 2022
Carl von Schantz, Managing Director
Battery
Listed
Conforms to Std.
UL 62133-2
Certified to CSA
Std C22.2 No.
62133-2
Publicidad
