Faults - WIKA SB15 Manual De Instrucciones

6. Faults

6. Faults
Personnel: Skilled personnel or service personnel
EN
CAUTION!
Physical injuries and damage to property and the environment
If faults cannot be eliminated by means of the listed measures, the instrument
must be taken out of operation immediately.
▶
▶
▶
WARNING!
Physical injuries and damage to property and the environment caused
by hazardous media
Upon contact with hazardous media (e.g. oxygen, acetylene, flammable
or toxic substances), harmful media (e.g. corrosive, toxic, carcinogenic,
radioactive), and also with refrigeration plants and compressors, there is a
danger of physical injuries and damage to property and the environment.
Aggressive media with extremely high temperatures and under high pressure
or vacuum may be present at the instrument.
▶
▶
WARNING!
Injuries and damage to property and the environment caused by
escaping liquid xylene after damage to the measuring line
Upon contact with escaping liquid xylene, there is a risk of injury caused by
inhalation or contact with skin. In addition, xylene is a flammable material and
thus can lead to damage to property and the environment.
▶
▶
For contact details see chapter 1 "General information" or the back page of
the operating instructions.
18
Ensure that pressure, temperature or signal is no longer present and
protect against accidental commissioning.
Contact the manufacturer.
If a return is needed, please follow the instructions given in chapter 8.2
"Return".
For these media, in addition to all standard regulations, the appropriate
existing codes or regulations must also be followed.
Wear the requisite protective equipment (see chapter 3.6 "Personal
protective equipment").
For this filling medium, in addition to all general regulations, the relevant
provisions must also be observed.
Wear the requisite protective equipment (see chapter 3.6 "Personal
protective equipment").
WIKA operating instructions models SB15, SW15