Publicidad
2.
Press the SET key to enter the month setting mode.
3.
The month digit will be flashing. Press the + key or CH/- key to set the month and
then press the SET key to go to the day setting.
4.
The day digit will be flashing. Press the + key or CH/- key to set the day.
5.
Confirm with SET key and enter the "°F/°C TEMPERATURE UNIT SETTING" or exit
the setting mode by pressing the MIN/MAX key.
Note: The weekday of calendar will be automatically set after the month and day value is
input.
°F/°C TEMPERATURE UNIT SETTING
The default temperature reading is set to °F (degree Fahrenheit). To select °C (degree
Celsius):
The "°F/ °C" will be flashing, use the + key or CH/- key to toggle between "°F" and
1.
"°C".
flashing
24
Publicidad
