Publicidad
Idiomas disponibles
Idiomas disponibles
• Slave Mode
Switches 1 ~ 9 have no function
7. DMX512 Mode
When operating the VDPL300MF2 through a DMX controller, you can create your own programs and tailor them to
your own needs. Each individual fixture is controllable through a standard DMX controller. To run your projector in
DMX mode, connect a controller using a standard DMX cable. Press MODE until D.XXX is displayed. Set the DMX
address.
• Detailed DMX Values per Channel
Channel
1
2
3
4
5
6
• DMX512 Connection
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-
pin XLR input of the VDPL300MF2. Multiple VDPL300MF2s can be linked through serial linking. The linking cable
should be a two-core screened cable with XLR input and output connectors.
• DMX512 Chain with Termination
VDPL300MF2_v5
1
2
3
4
Function
From
0
25
50
75
100
Mode
125
150
175
200
225
250
Red
0
Green
0
Blue
0
Speed
0
Dimmer
0
A DMX terminator is recommended for installations where the DMX cable has to run a
long distance or is in an electrically noisy environment (e.g. discos). The terminator
prevents corruption of the digital control signal by electrical noise. The DMX terminator is
simply an XLR plug with a 120Ω resistor between pins 2 and 3, which is then plugged into
the XLR output socket of the last device in the chain.
Please see illustrations.
5
6
7
8
9
To
Description
24
Dimmer mode
49
Auto 1
74
Auto 2
99
Auto 3
124
Auto 4
149
Auto 5
174
Auto 6
199
Auto 7
224
Auto 8
249
Auto 9
255
Sound mode
255
Brightness from 0 to 100%
255
Brightness from 0 to 100%
255
Brightness from 0 to 100%
255
Auto / strobe speed from slow to fast
255
Brightness from 0 to 100%
5
ON
OFF
10
HQPOWER
Publicidad
