Publicidad
Idiomas disponibles
Idiomas disponibles
servicing, when changing accessories such as
blades, and the like.
•
Store Idle Appliances Indoors – When not in use,
appliances should be stored indoors in dry, and high
or locked-up place – out of reach of children.
•
Maintain Appliance With Care – Keep cutting edge
sharp and clean for best performance and to reduce
the risk of injury. Follow instructions for lubricating
and changing accessories. Inspect appliance cord
periodically, and if damaged, have it repaired by an
authorized service facility. Inspect extension cords
periodically and replace if damaged. Keep handles
dry, clean, and free from oil and grease.
•
Check Damaged Parts – Before further use of the
appliance, a guard or other part that is damaged
should be carefully checked to determine that it will
operate properly and perform its intended function.
Check for alignment of moving parts, binding of
moving parts, breakage of parts, mounting, and any
other condition that may affect its operation. A guard
or other part that is damaged should be properly
repaired or replaced by an authorized service center
unless indicated elsewhere in this manual.
•
Keep all parts of the body away from the saw chain.
Do not remove cut material or hold material to be
cut when blades are moving. Make sure the switch
is off when clearing jammed material. Saw chain
continues to move after the switch is turned off. A
moment of inattention while operating the pole saw
may result in serious personal injury.
•
Carry the pole saw by the handle with the saw
chain stopped. When transporting or storing the
pole saw, always fit the saw chain device cover.
Proper handling of the pole saw will reduce possible
personal injury from the saw chain.
•
Hold the pole saw by insulated gripping surfaces
only, because the saw chain may contact hidden
wiring or its own cord. A saw chain contacting a
"live" wire may make exposed metal parts of the
pole saw "live" and could give the operator an
electric shock.
•
Keep cable away from cutting area. During
operation the cable may be hidden in shrubs and
can be accidentally cut by the saw chain.
•
Do not use the pole saw in bad weather conditions,
especially when there is a risk of lightning. This
decreases the risk of being struck by lightning.
•
To reduce the risk of electrocution, never use near
any electrical power lines. Contact with or use near
power lines may cause serious injury or electric
shock resulting in death.
•
Always use two hands when operating the pole saw.
Hold the pole saw with both hands to avoid loss of
control.
•
Always use head protection when operating the pole
saw overhead. Falling debris can result in serious
personal injury.
English
•
Prevent unintentional starting. Ensure the power
switch is in the off-position before connecting to
battery pack, picking up or carrying the appliance.
Carrying the appliance with your finger on the power
switch or energizing appliance that have the power
switch on invites accidents.
•
Make sure the power switch is off and the battery
pack is removed before clearing jammed material,
making adjustments, changing accessories, storing
or servicing the appliance. Unexpected actuation
of the appliance while clearing jammed material or
servicing may result in serious personal injury.
•
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
•
Use appliances only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
•
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
•
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or
burns.
•
Do not use a battery pack or appliance that
is damaged or modified. Damaged or modified
batteries may exhibit unpredictable behavior
resulting in fire, explosion or risk of injury.
•
Do not expose a battery pack or appliance to
fire or excessive temperature. Exposure to fire or
temperature above 130°C may cause explosion.
The temperature of 130°C can be replaced by the
temperature of 265°F.
•
Follow all charging instructions and do not charge
the battery pack or appliance outside of the
temperature range specified in the instructions.
Charging improperly or at temperatures outside of
the specified range may damage the battery and
increase the risk of fire.
•
Have servicing performed by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the product is
maintained.
•
Do not modify or attempt to repair the appliance or
the battery pack (as applicable) except as indicated
in the instructions for use and care.
2.2
CHILD SAFETY
Tragic accidents can occur if the operator is not aware
of the presence of children.
5
EN
Publicidad
