Symmons 3DIV-BODY Manual De Funcionamiento Y Mantenimiento página 4

Operation (cont'd.)
4) Turn handle to position 4 to share
functions 2 and 3.
Maintenance (Cartridge Replacement)
1) Remove cap assembly (A) from
diverter valve by turning coun-
terclockwise. Remove cartridge
extender (C) and cartridge (D). For
diverter valves purchased before
November 2016, remove retaining
sleeve (F) from diverter valve.
A
C
Note: Spacer (B) will be seated
inside cap assembly (A).
5) Turn handle to position 5 to share
functions 1 and 3.
2) Inspect cartridge for debris.
Replace cartridge if necessary.
3) Orient new cartridge (D) with
arrow facing down. Align pegs on
cartridge (D) with indents inside
diverter valve (E).
E
D
Note: For diverter valves purchased
before November 2016, retaining
sleeve (F) must be inserted flush into
diverter valve (E) before installing
cartridge (D).
D
E
4
6) Turn handle to position 6 to share
functions 1 and 2.
4) Align spindle extender (C) with
broach on cartridge (D). Install
spindle extender (C) and cap
assembly (A) to cartridge (D).
Secure cap assembly (A) by
turning clockwise.
C
D
A
Notes:
1) Use caution not to dislodge
cartridge from valve body when
installing cap assembly (A).
2) Tighten cap assembly (A) to
75 ± 5 lbf-in of torque.