EN
1
DESCRIPTION
1.1
PURPOSE
This machine is used to cut grass, light weeds, and other
similar vegetation at or around ground level. The cutting
plane must be approximately parallel to the ground surface.
You cannot use the machine to cut or chop hedges, shrubs,
bushes, flowers and compost.
1.2
OVERVIEW
Figure 1 - 20.
Trigger
1
Lock-out button
2
Upper shaft
3
Auxiliary handle
4
Lower shaft
5
Guard
6
Cut-off blade
7
Trimmer head
8
Guard cap
9
Blade
10
Release button
11
Positioning hole
12
Hex wrench
13
Central knob
14
Cap
15
Lower support
16
Spool cover
17
Spool
18
Tab
19
Line exist hole
20
Wrench
21
Nut
22
Outer cup
23
Outer ring-nut
24
Inner cup
25
Angle transmission hole
26
Bump knob
27
Direction of roatation
A
Best cutting area
B
Dangerous cutting area
C
1.3
PACKING LIST
1 String trimmer bare
tool
2 Brush cutter blade
3 Auxiliary handle
4 Guard
5 Metal rod
English
6 Wrench
7 Hex wrench
8 Shoulder harness
9 Operator manual
2
SAFETY
WARNING
Make sure that you follow all safety instructions.
Refer to Safety Manual.
3
INSTALLATION
WARNING
Remove the battery pack from the machine before
installation.
WARNING
Do not use accessories that are not recommended for this
machine.
3.1
UNPACK THE MACHINE
WARNING
Make sure that you correctly assemble the machine before
use.
WARNING
•
If parts of the machine are damaged, do not use the
machine.
•
If you do not have all the parts, do not operate the
machine.
•
If parts are damaged or missing, contact the service
center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance with
local regulations.
WARNING
For your personal safety, do not insert battery before the
tool is assembled completely.
3.2
ATTACH THE GUARD
Figure 2.
WARNING
Do not touch the cut-off blade.
1. Remove the screws from the trimmer head with a Phillips
screwdriver (not provided).
2. Put the guard onto the trimmer head.
4