Publicidad
Idiomas disponibles
Idiomas disponibles
Notes: 1.) The SPK207 may automatically reconnected to a previously linked device that
is in range, so you may need to turn off the Bluetooth on any paired device
first before going through the above steps
Under the FM mode,Press NEXT 1 seconds to search and store the
channels automatically.
Under the FM mode,Press PREV 1 seconds to Transfer Previous Stored channels
automatically
This unit provides an auxiliary audio signal input jack for connecting external audio device
like MP3 players, CD players and listen to your external source through the speakers of this
system.
1.
Use an audio cable (not included) with one 3.5 mm stereo plug on each end of the
cable.
2.
Plug one end into the RCA jack on the main unit and plug the other end of the cable
into the Line-out or Headphone Jack of your external audio device.
3.
Turn ON the unit and your external audio device.
4.
To select auxiliary audio input, tap the
"AUX" icon appears on display.
5.
The volume level can now be controlled through the main unit. Operate all other
functions on the auxiliary device as usual.
Note:
-
If you connect this unit to the line-Out Jack of your external device, you
only need to adjust the volume control of this unit. If you connect the Headphone
Jack of your external device then you may need to adjust both volume controls of
your external device and this unit to obtain the desirable volume setting.
Press and hold the "Stand-by/Mode" button to turn off the unit when
-
you have finished listening. Don't forget to switch off the power of your external
device as well.
Note:
1.
Some smart phones and portable devices use proprietary USB connections and
circuitry, so they may not charge when plugged into the USB port. Please refer to
your device user manual before you attempt to charge them.
2.
It is normal if the unit gets warm while the USB port is in use and charging your
User's Manual
FM Radio
RCA INPUT
16
button to select RCA mode.
E N
Publicidad
