After Use
After you have finished taking pictures, follow the steps below.
1
Submerge the Case in fresh water for about 30 minutes or
more without removing the digital camera to remove any
salt crystals etc.
•
Press all the operation buttons etc. on the Case to wash away any
seawater. If the salt crystals are not removed from the buttons etc.,
they will harden and the buttons will become inoperable.
•
Do not wash the Case with fast-running or pressurized water etc. as
it may cause water leakage.
2
Wipe the water with a dry cloth that has no salt crystals
sticking to it and then dry the Case completely.
•
Do not dry the Case by exposing it to direct sunlight. This may discolor or
damage the Case or may hasten deterioration of the O-ring.
18
VQT4V81 (ENG)