Bond Y95805 Manual De Instrucciones página 4

ASSEMBLY INSTRUCTIONS
Step 1
Place fountain on a flat level surface. Pull out the water
tube from the inside of fountain and connect it to the outlet
nozzle on the pump. Make sure the water tube connects
tightly to the nozzle. Place the pump into the inside of the
fountain.
Step 2
Pull out power cord of light from the inside of fountain
and plug the end into transformer. Screw the preas-
sembled ring over the cable to secure the connection.
Step 3
Attach the back cap to the opening on the back of the
fountain, making sure to feed the pump & light's power
cords through the small notch on the back cap. Turn the
back cap clockwise to secure.
4
1