Publicidad
Idiomas disponibles
Idiomas disponibles
CARE AND MAINTENANCE
• If necessary, clean the fountain with a soft cloth and change the water frequently. Due to water
evaporation, you may see a buildup of white residue on the fountain surface from mineral content in
the water supply. To prevent such buildup, regularly clean the fountain with soap and water. Do not
•
covered under the manufacturer's warranty.
• Check regularly that the water reservoir has sufficient water to cover the pump at all times. It will be
necessary to check more frequently in warm or windy weather.
• Disconnect the power and empty the reservoir if the fountain will not be used for an extended time.
• If installed outdoors and in a freeze-prone area of the country, ensure all water is removed and
the unit is completely dry before temperatures drop too low. This product is NOT to be operated
below 41°F or freeze damage may occur.
•
Store your product indoors during winter months. Avoiding extreme cold temperatures will
prevent from exposure damage.
• Keep this manual for future reference.
HOW TO REPLACE THE LED LIGHT:
1
Rotate the head of light, and uncover
it with the power cord.
Model#
YH-505MIX
Frequency
NOTE: The pump data in this manual is from
lab tests. The actual pump may be different
due to the method of production or technical
improvements. This data can be used as a
reference when purchasing a similar pump.
2
1
Pull out the LED light and replace it
with a new one, then reverse step 1
and finish installing the new LED light.
Description
water
pump
Flow Height
60Hz
200cm
1
Volt.
Power
120V
25W
Flow Volume
1000L / hour
7
Publicidad
