Loading
For best dishwashing results, follow these loading guidelines. Features and appearance of racks and silverware
baskets may vary from your model.
Upper Rack
The upper rack is for glasses, cups, and saucers. This
is also a secure place for dishwasher-safe plastic items.
The upper rack can be used for odd sized utensils.
Sauce pans, mixing bowls, and other similarly shaped
items should be placed face down for best wash
performance.
The cup shelf may be placed in the up or down position to
add flexibility.
PDT145 & UDT165 Series
8 Place Settings
Upper Rack - Adjustment
A loaded upper rack may be heavier
CAUTION
than anticipated. To prevent minor
injury or damage to the contents, do not raise or lower
the upper rack after the rack is loaded.
The upper rack may be adjusted to accommodate larger
items.
To adjust the upper rack:
1
Fully extend the upper rack and rotate open the two plastic
end caps on the front of the rails.
2
Remove the upper rack.
3
Select the set of rollers on the side of the rack that
provides the desired height, and reinstall the upper rack by
guiding the rack rails between the appropriate set of
rollers.
4
With the rack reinstalled, rotate closed the two plastic end
caps, ensuring the snap is properly engaged. Failure to
properly engage the end caps may result in the rack falling
from the dishwasher.
8
IMPORTANT: Ensure that
items do not protrude through
the bottom of the rack where
they will block the rotation
of the upper spray arm. This
could result in noise during
operation and/or poor wash
performance.
GDT225-226 Series
8 Place Settings
Remove:
Replace:
End
Cap
GDT225-226 Series
10 Place Settings
End Cap
Rail
Rollers
Rollers
Rail
49-4000275 Rev 1