The appliance may be installed on its own or next to a piece of furniture or a wall.
−
Placing it next to a piece of furniture or a wall may lead to an increase in its power consumption.
−
There must be also be a sufficient gap behind the appliance (see installation diagram).
−
Make sure you leave enough free space at the front so that the door can be fully opened when
−
removing the drawers and shelves (see installation drawing).
Levelling
To prevent the appliance from vibrating when it is on, it must be levelled or slightly inclined towards
the rear.
This is easy to do using its height-adjustable feet at the front.
To allow the door to close automatically, tilt the top back 10-15mm.
23