Cameo G4 TW Manual De Usuario página 19

Calibra-
= Colour calibration
tion
Switching wireless
W-DMX =
control on and off
Status
= Set status LED
LED
Power = Operating mode
Factory Reset to factory
=
Reset settings
SYSTEM INFORMATION (SysInformation)
Starting from the main display, press the encoder to enter the main menu. Select the menu item
SysInformation and confirm the selection.
This will take you to the submenu for accessing the system information (see table):
SysInformation
Firmware = Displays device firmware
Tempera- Displays temperature of LED
=
ture unit
Operation
= Displays operating time
Hours
Warm White Cross-mode brightness setting of
WW and CW with values from 0 –
Cold White
255
Off Wireless control disabled
On Wireless control activated
Always On LED Permanently on
Off LED off
LED is switched off after 30 sec-
Off after 30s
onds
Constant brightness over long
Constant
periods
Maximum Maximum brightness
Resetting to factory settings:
Reset? Perform reset with ENTER, cancel
with MENU
Main CPU
V1.xx
LED TEMP xx °C / xx °F
Tempera-
ture Unit
xx:xx h
Celsius (= display in degrees
Celsius)
Fahrenheit (= display in degrees
Fahrenheit)
Display of the unit operating time
in hours and minutes
19