BGS technic 9017 Instrucciones De Uso página 5

SAFETY INFORMATIONS
•
Use this tool only for the work for which it was designed.
•
Before starting repairs, secure the vehicle against accidental starting. (Remove ignition key,
disconnect battery)
•
Always use caution when performing repairs or servicing fuel systems. Fuel lines can be
pressurized even when the engine is off.
•
Relieve the pressure in the fuel lines before performing repairs or servicing the fuel system.
Immediately bind spilled fuel with a suitable binding agent and dispose of it in an
environmentally friendly manner.
•
Only work in well-ventilated rooms and avoid inhaling fuel vapors.
•
Wear approved safety glasses and safety gloves during repairs.
•
Do not smoke while performing repairs or servicing fuel systems.
Smoking and open flames can lead to fire.
•
Always have a fire extinguisher suitable for fuel-related fire nearby.
•
Keep children and unauthorized persons away from the work area.
•
Do not let children play with this product or its packaging.
•
Make sure the work area is adequately lit.
•
Keep the work area clean, tidy, dry and free of other materials.
•
Do not allow untrained persons to work with this tool kit.
•
Always work according to the vehicle manufacturer's instructions. This instruction manual
serve only to illustrate the product and in no way replace vehicle-specific service literature.
•
After finishing the work, make sure that all fuel lines are tight and there are no tools in the
engine compartment.
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. Packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with
the environment. Contact your local solid waste authority for recycling information.
REMOVING INJECTOR
A Injector fuel line connector
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed