BGS technic 9017 Instrucciones De Uso página 4

TOOLS
1 Thread adapter (slide hammer on injector)
2 Slide hammer weight
3 Pull-out bolt, length 70 mm
4 Slide hammer bolt, length 120 mm
5 Injector seal ring mounting cone, to be used as OEM 130195
Injector seal ring mounting sleeve set, to be used like OEM 130190, consisting of:
6 Seal ring mounting sleeve (large diameter), to be used as OEM 130192
7 Seal ring mounting sleeve (medium diameter), to be used as OEM 130193
8 Seal ring mounting sleeve (small diameter), to be used as OEM 130194
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This tool kit is used to disassemble the injectors and assemble the sealing rings on gasoline direct
injection engines:
More information regarding this item and a list of suitable engines and models can be found on our
website: www.bgstechnic.com
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Injector Extractor Set
for BMW Petrol Direct Injection
BMW N54 (6 cylinder) / N63 (V8)
MINI N14 (4 cylinder) / N18 (4 cylinder)
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 9017
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed